In a nutshell: Google’s midrange champ, the Pixel 6a, is perhaps higher worth than it seems at first blush. Following some hypothesis that the telephone may secretly have a 90 Hz panel, a developer discovered a approach to overclock it from 60 Hz to 90 Hz with a mod that appears to be fairly dependable.
It began when some curious builders seen that the Pixel 6 and Pixel 6a share an integral piece of show {hardware}: one thing that their software program acknowledges because the s6e3fc3, which the builders thought was the panel or its controller. In concept, then, if the Pixel 6 helps a 90 Hz refresh price, the 6a ought to, too, and could possibly be restricted to 60 Hz by software program, not {hardware}.
Working from this concept, a developer referred to as TheLunarixus came up with a approach to see if the Pixel 6a’s panel was overclockable. He took the 6’s show driver and software program bundle and blended it with the 6a’s model of Android 13, then flashed the outcomes to his 6a. With that, the choice to allow the 90 Hz mode appeared in his 6a’s developer settings, and when he switched it on… it labored.
He shared the software program bundle he had pieced collectively and his fellow fans, together with Sean Hollister at The Verge who was in a position to replicate the outcome. There have been some minor points posted to Twitter that Lunarixus was largely in a position to troubleshoot, except for a persistent drawback with the panel’s colour calibration, or lack thereof. A number of customers complained a few inexperienced tint that appeared after the mod was put in, even earlier than the 90 Hz mode was enabled.
UPDATE: I flashed a brand new vendor_boot picture despatched by @TheLunarixus and now my Pixel 6a can run at 90Hz! The inexperienced tint/calibration subject remains to be very very noticeable on my unit, although @MaxWinebach says it is not there on his. pic.twitter.com/beM2vmTTo9
— Mishaal Rahman (@MishaalRahman) August 11, 2022
In any other case, the testing up to now has proven that the Pixel 6a can reliably overclock its panel to 90 Hz with out inflicting any catastrophic {hardware} failures. TheLunarixus is fast to level out that the mod leaves the panel’s default voltages and energy consumption intact, which makes injury to the {hardware} unlikely.
However one query goes unanswered: is that this a typical overclock that takes benefit of the {hardware}’s headroom, or was this a function that Google determined to disable in software program? Sadly, neither Google nor Samsung, the panel’s producer, have answered that query but.
Additional investigation revealed that the s6e3fc3 system is not the panel in spite of everything, however most certainly the driving force for the controller. It is nonetheless unclear if there are similarities between the Pixel 6 and 6a’s panels, which do differ in each decision and measurement.
In the intervening time, we would suggest towards attempting this mod out for your self except you’ve gotten a spare three-month previous Pixel 6a someway. On the upside, TheLunarixus says that he is engaged on a easy ROM for the mod that may make it virtually plug and play, and it is perhaps value contemplating then.
Picture credit score: Thai Nguyen
