tenth technology Mac mini 2.26GHz.
Refurbishing the final of the plastic physique Mac minis is fairly simple — as soon as just a few tips. This is easy methods to get that 15-year outdated pc up and operating once more, and sooner as well.
Like its predecessors, the tenth technology mannequin had an aluminum/polycarbonate plastic shell with a plastic/rubber base and an inner plastic drive provider.
The two.26 Ghz mannequin was one of many final polycarbonate fashions made earlier than Apple switched to the all-aluminum unibody design.
There have been basically three subfamilies of the unique minis, spanning 10 “generations.”
The ultimate mannequin within the polycarbonate collection was a mini server. This mannequin lacked an inner DVD-R drive and which as an alternative contained two similar 500GB arduous drives.
The ultimate polycarbonate mini fashions shipped in June 2010. The whole line spanned roughly 5 years.
You possibly can nonetheless discover many of those machines in on-line retail and public sale websites equivalent to eBay for a really affordable value.
We paid nearly $60 for ours which included the 120V energy brick, a mini DisplayPort to VGA video adapter, in addition to an authentic Apple Magic Mouse.
Mac mini eBay haul: VGA adapter, mini, energy brick, DVDs, and an Apple Magic Mouse.
Not like the sooner mini fashions, Apple made some inner enhancements to the two.26 and later fashions which makes refurbishment a bit simpler.
Consider nevertheless, refurbishment is an in depth course of and is just for these assured of their restore skills. The Mac minis include quite a lot of tiny elements and screws, and with fifteen-year outdated plastic, elements can break simply.
Try this restore at your personal threat.
As with earlier mini refurbs, you may want a particular set of instruments to open the machine:
- A 4.5-inch (11.5cm) wall spackling device
- A medium magnetized Phillips-head screwdriver
- A tiny magnetized Phillips-head electronics screwdriver, or jeweler’s screwdriver
- A small flat plastic or metallic spudger
- Scissors
- Compressed air or an air compressor
- A shiny flashlight
- Vivid room lighting
- Optionally a small magnifier or jeweler’s loupe
- Kapton tape
- A CR2032 alternative button-cell battery
Step 1: Open your Mac mini
Utilizing both a big soldering mat, or a mushy fabric or towel, lay your Mac mini the other way up in preparation to open it.
You will use a large spackling knife to open the case. There’s an artwork to this however for those who’re cautious it isn’t too tough.
To open the case, orient the pc with the entrance in direction of you, high down. The machine’s ports ought to be going through away from you.
Lay your Mac mini face down in preparation for opening.
Insert the spackling knife into the seam on the proper facet of the machine, and pry up and to the proper in a single sharp movement. This could loosen then case from the highest shell.
Subsequent, insert the knife into the entrance seam and repeat the method. At this level the case ought to be free sufficient from the highest cowl to take away it.
Set the highest cowl apart for later cleansing.
Case open, high cowl on left. Word the three antennae on the perimeters.
Now flip the bottom of the machine over. You will see the DVD drive on high, an AirPort antenna on the proper facet, and two Bluetooth antennae on the left facet.
The antennae are held in with plastic clips and comes, which for those who pinch and pull up will free every antenna. Go forward and do this now (rigorously) and set the three captive springs apart for later.
Antennae springs.
A cursory look across the machine exhibits 4 small screws holding the highest DVD optical drive in, in addition to two small screws on the rear of the drive which maintain a small SATA board on.
There’s additionally a really small audio ribbon cable on the SATA drive board on the rear. This is likely one of the enhancements Apple made to later mini fashions: the audio cable is held in by nothing however friction and you’ll take away it simply with a small plastic spudger or screwdriver.
Gone are the two-part plastic ribbon cable clips which have been inclined to wreck and really tough to re-seat correctly.
Go forward and take away the audio cable and set it apart additionally now.
Rear DVD drive board with audio cable.
Step 2: Take away the DVD-R drive
Subsequent, utilizing a tiny screwdriver take away the 4 small screws which maintain the DVD-R drive to the plastic drive provider. Two of those screws are simple to entry on the left facet of the machine, however the different two are positioned in recessed holes on the opposite facet.
Fastidiously take away the screws and set them apart.
DVD and arduous drive screws.
Subsequent, spin the machine round so the rear faces you, then take away the 2 tiny screws which maintain the small SATA drive board to the rear of the DVD-R drive.
You need to now be capable of carry the DVD-R drive up and ahead to free it from the provider and the SATA board.
Word that the SATA board is hooked up to the drive provider by a single wire so make certain to not disconnect the wire.
DVD-R drive faraway from provider.
One of many enhancements Apple made to the later mannequin minis was a smaller, lighter DVD drive. Ours had Sony mannequin AD-5680H-P2 in it.
These DVD-R drives are remarkably gentle, environment friendly, and are constructed from super-miniature elements. They’re additionally extra quiet and run cooler than their predecessors.
Sony Optiarc AD-5608H-P2 mannequin.
The one draw back to those drives appears to be the sluggish entry time. Nonetheless, although, it’s nonetheless sooner than the entry time within the drives discovered within the first Mac minis.
Step 3: Take away drive provider from the bottom
Now find the 4 tiny black screws on the 4 corners of the plastic drive provider. Two of those screws are recessed in spherical enclosures, and two of them are uncovered on the provider.
Take away all 4 screws and carry the drive provider away from the machine’s base. Word that the SATA board holds the provider right into a connector slot with friction so it could take a little bit drive to take away the provider.
As soon as the provider is freed from the bottom, set it apart for later.
Drive provider, proper, and Mac mini base with motherboard, left.
Word the small copper clip on the entrance of the bottom. This clip has to contact the within of the machine’s metallic cowl or the machine will not boot when powered on.
Additionally discover the small coin-cell battery to the proper of the clip on the bottom’s entrance. This battery retains the inner clock and VRAM settings intact when the machine is powered down.
Step 4: Clear the bottom, exchange clock battery
Subsequent, utilizing compressed air or an air compressor, blast any mud from the bottom, together with across the CPU heatsink, the WiFi board, and the rear vent ports.
You may additionally wish to rigorously take away the RAM DIMMs from their slots to wash below them. Watch out when eradicating the RAM for the reason that sockets are plastic and may break simply.
The default RAM configuration for this mannequin is 2GB. Our machine contained 4GB of Apple-installed RAM (2GB X 2).
Mac mini base with motherboard. Word left to proper: LED meeting, coin-cell battery, and RAM.
Word that the combo WiFi/Bluetooth board additionally has a small ribbon cable and the three exterior antennae hooked up to it with small pin clips.
These connectors are very simple to jar free – so make certain you do not bump the antennae wires and disconnect a number of of the antennae. Actually, it’s possible you’ll wish to add small strips of Kapton tape to every of the antennae connectors to verify they do not come free:
Mac mini combo WiFi/Bluetooth board with Kapton tape added.
To be able to clear beneath it, you may take away the WiFi board by eradicating its small screws for those who like. Except your machine is exceptionally soiled you most likely needn’t.
Compressed air ought to suffice.
You may additionally wish to use a small dry paint brush to wipe away any extra mud from across the base edges and the on the motherboard. Do not use an excessive amount of drive because the elements could also be fragile.
On the entrance of the bottom is the CR2032 coin-cell battery. To take away it, rigorously carry up on the clips on the proper and high of the battery holder, and pull the battery away from the holder to the rear.
Change the battery with a brand new similar one by dropping it down into the holder and urgent down and ahead. Do not use an excessive amount of drive because the holder is plastic and may break simply.
Lastly, clear all of the rear ports on the machine, together with the fan ports by utilizing cotton swabs with 80% isopropyl alcohol. Cleansing the rear fan ports ensures there isn’t any residual mud odor if you restart the machine later.
Step 5: Optionally available – Change RAM
When you like it’s also possible to exchange the RAM as much as a most of 8GB by changing the 2 current 1GB SO-DIMMs with two 2GB, or 4GB fashions. You will want PC3-8500 DDR3 DIMMs.
To take action, merely unclip the 2 current DIMMs and exchange them with two new ones. Reminiscence upgrades can be found at a number of on-line retailers.
Our mannequin got here with 4GB RAM commonplace at 2GB per DIMM. We determined to go away it at that.
However for those who’re planning on operating the inventory Mac OS X Snow Leopard (10.6.8), you seemingly will not want 8GB because the machine runs fairly properly with 4GB. The decrease 2GB amount might be sufficient for many duties.
Authentic Mac mini SO-DIMMS – on this case 2GB X 2.
Step 6: Clear the drive provider, fan, and exchange the arduous drive
The plastic drive provider holds the inner arduous drive, a small cooling fan, and a small thermal sensor which detects drive overheating.
The sensor is held on to the entrance of the arduous drive with rubber cement, however you may seemingly simply peel it off and reapply it to a alternative SSD with none further glue.
To take away the drive, flip the drive provider over, lay it face down, then take away the 4 screws on the underside holding the drive in. You will want to slip the drive out sideways, and disconnect it from the SATA board.
The drive provider, with the arduous drive on the left. Word the tape.
Watch out because the thermal sensor continues to be hooked up to the SATA board by its wire and you do not wish to pull it free.
As soon as the drive is free, take the drive provider exterior and blast the fan and and its outlet duct clear of any mud with compressed air.
The arduous drive’s thermal sensor.
As soon as cleaned, exchange the two.5-inch arduous drive with a brand new SATA SSD of your alternative. We used an additional 128GB SSD however bigger ones will work simply tremendous. Amazon has 1TB SATA SSDs for lower than $100, and so they make a pleasant improve.
Mac OS X Snow Leopard installs tremendous onto a 128GB SSD so you will not want a big one.
New SSD drive put in in Mac mini 2.26GHz drive provider.
As soon as the brand new SSD is put in, reapply the thermal sensor and two small high pads from the outdated arduous drive onto the brand new SSD. You will not want the thermal sensor for the SSD however reapply it to the drive anyway to stop malfunction.
Plug the SATA drive board again into the rear of the brand new SSD. It is held in by nothing however friction.
If there was a small piece of black tape holding the thermal sensor wire to the underside of the arduous drive, reapply it now to the underside of the SSD in the identical place.
Totally cleaned and reassembled drive provider with new SSD.
After all the pieces is reassembled on the provider, merely drop it again onto the bottom unit in place. Fastidiously press down on the highest of the SATA board to lock it into the SATA connector on the bottom’s motherboard.
Nothing else is required to reinstall the provider. Now merely re-install the 4 nook publish screws to the provider to safe it to the bottom.
Word that when reinstalling the provider, make certain the three antennae wires are positioned appropriately: the right-side WiFi antenna wire sits on the rear of the machine between the exhaust vent and the small audio board.
The 2 Bluetooth antennae wires exit on the left facet of the bottom.
Totally reassembled base with drive provider put in.
Step 7: Re-install the DVD-R drive
Subsequent, reinstall the DVD-R drive to the highest of the provider by sliding it into place and re-attaching the rear SATA drive board to its rear connector. Reinstall the drive board’s two small screws.
Safe the 4 facet screws holding the DVD-R drive in place.
Reinstall the three antennae springs on their posts on the highest of the provider, then snap the three antennae again onto the posts, ensuring the publish clips seize the antennae.
Re-attach the small ribbon cable on the again of the drive board to reconnect the SATA drive board to the audio board.
This completes the drive improve and the provider reassembly.
Totally reassembled Mac mini, apart from the quilt.
Step 8: Re-install the highest cowl
Make one last verify of all the pieces on the machine earlier than you re-install the highest cowl.
In case your machine was very soiled you might also wish to tip the bottom on its facet and blow out the underside vent holes with compressed air. These holes are the place air enters the underside of the machine ought to the fan come on for cooling.
Totally cleaned and restored Mac mini – prepared for last meeting.
Subsequent, flip the bottom over and thoroughly re-insert it again into the highest cowl, however do not shut it but.
First ensure the metallic safety clip and the small metallic clips alongside the rear of the bottom line up with the within fringe of the lid. If these clips do not line up, the lid will not shut all the best way and you will be left with a spot within the case.
Be certain the clips line up.
As soon as all the pieces is lined up, and from a standing place, with fingers turned outward and palms going through down, give the bottom one strong push downwards into the lid. This could seal the case.
You need to hear a pointy click on as each the plastic clips and the metallic clips have interaction with the within of the lid.
Case place earlier than last closure.
Try to be left with no gaps in any way anyplace on the case.
If there’s a hole on the rear of the case you may have to pry the bottom free once more with the spackling knife and check out once more.
A well-sealed case ought to look one thing like this:
Appropriately re-sealed lid: no gaps anyplace across the rear, or the underside.
Step 9: Energy on and set up software program
As soon as the machine is absolutely reassembled, it is time to check it.
Plug within the energy brick, a show adapter, and a USB mouse and keyboard. In our instance we’re utilizing the Apple mini DisplayPort to VGA adapter, however it’s also possible to use the mini DVI adapter in case you have one.
Any USB mouse will do, however the minis have been initially designed for use with the clear and white Apple USB keyboard (A1048). We’re fortunate sufficient to nonetheless have one new, in mint situation:
Apple wired USB keyboard.
You will want the Apple keys on the USB keyboard to begin up from a DVD or exterior drive.
Plug the opposite finish of the video cable right into a monitor. For our instance we’ll be utilizing a recycled Acer V173 15-inch VGA monitor from Goodwill which solely value $10.
Smaller trendy 16:9 displays also needs to work tremendous, if they’ve VGA or DVI inputs.
You possibly can join two shows for those who like. As soon as all the pieces is related, press the facility swap and wait.
Rear connections: energy, Ethernet, FireWire 800, mini DVI, mini DisplayPort, USB.
If all the pieces goes based on plan, you must see a gray display adopted by the flashing folder icon indicating there isn’t any OS to load.
Subsequent, insert the Mac OS X set up CD that got here with the machine, or a retail copy of the Mac OS X DVD. As quickly as you insert the DVD, it ought to spin up and Mac OS X ought to begin to load.
Booting: the soul of a brand new(ish) machine.
As soon as the Mac OS X installer masses, choose Disk Utility from the Utilities menu, format the inner drive as Mac OS Prolonged (HFS+), after which exit Disk Utility.
Again within the installer you may see the drive you simply formatted. Choose it and click on to proceed set up.
There’s additionally an Choices button within the installer which lets you choose further elements to put in.
Choose Disk Utility to erase the inner drive.
The set up can take anyplace from thirty to sixty minutes so be affected person. As soon as the installer is finished, you may have to arrange a consumer title and password for login.
As soon as that is accomplished, restart the machine.
After restart you may be requested to undergo a number of steps to complete establishing Mac OS X, together with connecting to a WiFi community.
When you end all these steps, you may be left within the Finder.
Mac OS X set up full. Reboot.
Subsequent, open System Preferences within the Dock, and run Software program Replace. Apple nonetheless maintains the Snow Leopard replace servers so you may obtain and set up any updates from there.
As soon as software program replace is finished, Restart. Again within the Finder set up the Apple Functions DVD that got here with the mini and set up any further apps you need equivalent to iMovie and GarageBand.
The two.26GHz Mac mini can run as much as Mac OS X El Capitan 10.11.6 launched in 2018, so if you will discover that installer on Apple’s Help website, or the App Retailer you may set up it for an improve.
El Capitan requires 2GB RAM minimal.
Apple’s 2nd-gen white wired USB mouse (A1152 EMC No: 2058).
Step 10 (Optionally available): Run Home windows
This mannequin of Mac mini is able to operating both Microsoft Home windows XP or Home windows 7. The included Boot Camp utility within the /Utilities folder lets you partition the inner drive and set up Home windows onto a type of partitions.
You will want an genuine copy of the Home windows XP or 7 installer, and a legitimate Home windows serial quantity. It’s also possible to use a legitimate Home windows installer .iso file in Boot Camp in case you have one.
The Boot Camp Assistant could or could not additionally ask you to insert a USB thumb drive to obtain elements to, so have one useful simply in case.
After all, if you want you may run both of the Home windows installers and take over all the inner SSD and switch the mini right into a Home windows machine, however with the power as well each you may most likely wish to set up each.
To take action, run Boot Camp, choose the inner drive, set the partitioning divider to dimension each partitions, then step by way of the set up course of. Insert your Home windows DVD set up disk when prompted.
Boot Camp will re-partition the drive and reboot into the Home windows installer. Home windows will get put in onto the second partition, whereas your Mac OS X set up is left alone on the primary.
Step by way of the Home windows installer and enter your serial quantity when prompted.
Apple’s Boot Camp Assistant.
As soon as Home windows installs, reboot and maintain down the Choice key on the keyboard. This enters the boot quantity selector the place you may click on both the Mac or Home windows quantity because the Startup Disk as well from.
It’s also possible to set which quantity as well from in System Preferences within the Startup Disk pane so you do not have to carry down the Choice key subsequent time when beginning up.
Being able as well Home windows from a Mac is useful, and initially it was one of many main promoting factors of the early Mac minis.
With an SSD drive put in, the two.26Ghz Mac mini is definitely fairly quick. Ours booted into Mac OS X in below three seconds.
Shutdown is equally quick and took solely two seconds.
Earlier variations of Mac OS X had much less software program bloat and so generally have been quick.
There are additionally a lot of fascinating out there third-party upgrades on the market on-line, such because the OWC Information Doubler which lets you exchange the inner DVD drive with a second inner SSD by utilizing a particular bracket.
For a completely full retro expertise, you should definitely decide up some outdated VST FireWire drives equivalent to a tough drive or exterior CD-R drive.
The later mannequin Mac minis from the polycarbonate collection have been well-designed, and properly made. Lots of them are nonetheless operating right this moment – and with a little bit work can nonetheless be upgraded and restored to be fairly helpful.
