SwitchBot Smart Switch Button Pusher review: specs, price

SwitchBot Good Change Button Pusher evaluate: Put in Good Change Button Pusher

Good dwelling ecosystems lack compatibility with many family home equipment, particularly HomeKit. Nonetheless, there are easy methods to rework fundamental gadgets into good ones, akin to utilizing a sensible plug or a button pusher.

The Change Button Pusher grew to become notorious for being a easy answer for individuals who had been too lazy to push a button. But, when you consider it, the system can assist make the home equipment in your house good with out a sophisticated setup.

Whether it is controlling a lightweight change or turning on the espresso pot, the SwitchBot Good Change Button Pusher can assist make any equipment with a button good at a good value. Though, it can’t do it alone.

When initially on-line pictures of the system, the SwitchBot Good Change Button Pusher could appear to look compact. Whereas small, it is nonetheless very cumbersome and stands out quite a bit.

SwitchBot Good Change Button Pusher evaluate: Bulkiness

Measuring 1.67 x 1.44 x 0.94 inches and weighing 1.38 ounces, the Change Button Pusher is small and lightweight sufficient to hold on the wall or high of your system. Whereas it does stick out 43 mm, it nonetheless blends in with a fundamental gentle change in case you do not stare at it too lengthy.

On high is a bit arm that pops out while you command it to activate a tool and retracts when it is finished working.

SwitchBot Good Change Button Pusher evaluate: Arm and sticker

Throughout the arm is an insert that permits you to join the included sticker to it. This sticker permits the Change Button Pusher to drag again on what it is connected to — like a change rocker — to show it off.

Attempting to get the loop into the hook was troublesome at first, however we lastly acquired it in after a few tries. If one thing occurs with the primary one, a second sticker is included within the field.

The sticker and Change Button Pusher are connected to your equipment by way of the adhesive strips on them.

Contained in the Change Button Pusher is an included lithium steel battery, lasting as much as 600 days. Changing the battery as soon as its lifespan is full is straightforward; simply pop off the again, take it out, and put within the new battery.

SwitchBot Good Change Button Pusher evaluate: Internals, reset button, and battery

Additionally contained in the system is a reset button. As you in all probability have already guessed, this lets you restart the Change Button Pusher if it isn’t responding or wish to set it to manufacturing facility settings.

Not like different HomeKit gadgets, the place you may select which app to arrange the system, the SwitchBot Good Change Button Pusher mandates you to make use of its native one. It’s because the machine makes use of a bridge inside the app to connect with the Dwelling app.

A Bridge permits you to talk with equipment who cannot talk straight with HomeKit.

Organising the Good Change Button Pusher is straightforward; you simply discover it inside the SwitchBot app, pair it by way of Bluetooth, and decide how the system must be arrange.

As soon as all is configured, you may management the change out of your system. The motion is fairly fast to finish, and you’ll implement a schedule so it activates and off routinely based mostly on the time of day.

The Good Change Button Pusher has two modes: Change Mode and Press Mode. With Change Mode, the arm can push in the direction of and draw back from the change to manage a rocker-light change. However, Press Mode solely pushes the arm in the direction of the button to activate it.

SwitchBot Good Change Button Pusher evaluate: Controls inside the SwitchBot app

You probably have an iPhone 6 or later, and have an additional NFC tag mendacity round, then you may program it to manage a particular motion on the Good Change Button Pusher. You’ll be able to set it to both distinctly activate an equipment, flip it off, or change between the 2 actions.

The present firmware construct quantity and battery degree are in the identical part inside Settings. Right here, you may see how a lot battery is left inside the lithium steel battery — displayed by a battery icon — and what firmware the system is on.

Updating the firmware is fairly fast, however you have to be near the change to have it full the replace. If you happen to’re not, then the app will say there’s an error and to attempt once more.

From what we will see, there doesn’t appear to be an choice to allow automated updating for the Good Change Button Pusher.

With the introduction of Matter, numerous gadgets grew to become appropriate with HomeKit. Nonetheless, the catch was they might want a further accent to allow the compatibility, and the SwitchBot Good Change Button Pusher is a kind of dependent gadgets.

To make use of the Good Change Button Pusher inside the Dwelling app, you may want the SwitchBot Hub 2. This little system permits Matter help to a handful of your SwitchBot merchandise and bridges them to the Apple good dwelling ecosystem.

SwitchBot Good Change Button Pusher evaluate: SwitchBot Hub 2 (bought individually)

You must configure the Hub 2 earlier than placing collectively the Good Change Button Pusher so it connects to the hub in its preliminary setup. As soon as completed, you should replace the change to the most recent firmware to be appropriate with Matter help.

As soon as the firmware is up to date, you should go into the Hub 2’s settings and add the Good Change Button Pusher as a secondary hub system. This can import the change to the Dwelling app by the created bridge.

SwitchBot Good Change Button Pusher evaluate: Change inside the Dwelling app

After you will have added the system, you may group it, customise it, and add it to Automations similar to you’ll with different HomeKit-compatible gadgets. Nonetheless, since there’s a Bridge between the Dwelling app and its native app, instructions might take an additional second to finish.

The SwitchBot Good Change Button Pusher is a good way to show practically any fundamental system good. But, it wants the help of one other SwitchBot product to take action.

With its gentle design and robust adhesive, the Good Change Button Pusher will keep positioned regardless of the place you stick it. But, it might be troublesome to take away if you wish to change it to a different system.

SwitchBot Good Change Button Pusher evaluate: Put in Good Change Button Pusher

Together with a sticker permits you to flip a lightweight on and off with a single Good Change Button Pusher. That is very environment friendly when setting Automations, and deters the necessity to buy one other change to do the other motion.

Whereas the Good Change Button Pusher is a good addition to your good dwelling, it does require the SwitchBot Hub 2 to attach it to the Dwelling app. The Hub 2 can value upwards of $70; with the change costing $30, you may spend $100 to manage a fundamental accent.

Nonetheless, you probably have a home constructed earlier than the Nineteen Eighties, and wish to management your lights remotely with out rewiring the home, then $100 might not look like so much in the long term. Moreover, one Hub 2 can management a number of Good Change Button Pushers.

If you happen to love controlling each side of your own home and desire a easy technique to make a fundamental equipment good, then the SwitchBot Good Change Button Pusher is price trying out. But, in case you do not wanna spend $100 to push a button from the Dwelling app, you must have a look at different alternate options.

• Compact design
• Turns home equipment on and off
• Lengthy lifespan
• Sturdy adhesive attachment

• Requires the SwitchBot Hub 2 to be appropriate with Matter
• Cumbersome
• Loud when working

You should purchase the SwitchBot Good Change Button Pusher from their web site for $29.99. It is out there in black and white.

It is also out there on Amazon for $29, and is accessible in the identical colours.